Filter By:
- Electronics (265)
- Eyewear (30)
- Fenders (105)
- Hydration (273)
- Lighting (262)
- Locks/Security (202)
- Nutrition (56)
- Packs/Racks/Baskets (378)
- Show More Categories
- Pumps/Inflation (211)
- Safety (65)
- Tools/Maintenance (1013)
- Trailers/Strollers (74)
- Indoor Cycling (44)
- Other (108)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Accessories
- Waterproof IPX7: Operates even after 30 minutes of submersion in a depth of 1 meter
- 3x brighter than EL135
- OptiCube lens technology
- Low battery indicator
- Mode memory function
- Two light modes (Constant / Flashing)
- Replaceable bracket spacer
- FlexTight bracket
- Runtime : Constant: 30 hours (50 lumens) (Approx.) Flashing: 250 hours (50 lumens)
- Battery type : 2 x AA alkaline battery
- 5 ultra bright LEDs
- Design offers high visibility
- 3 modes: rapid, flashing, constant
- Run time: R - 60h to 120h, F - 40h to 120h
- 2x AAA batteries included
- FlexTight bracket
- Battery tail lamp with reflector for rear rack
- Compatible with 50mm, 80mm and 19mm (center mount)
- Waterproof construct IPX4
- Built-in wide angle reflectors
- Meets StVZO, RKF and Danish lamp standards
- Meets StVZO Z, BS, UN IVA, UN IA and CPSC reflector standards
- Low battery indicator
- Tool-free battery replacement
- Ideal fit for very short stems with steep upward stem angles
- 1cm rise in the base will allow larger cycling computers like the Garmin 1030 to nest securely above the stem without interference
- Direct mounting for an aero cockpit
- Strongest platform for your cycling computer and light or camera
- Compatible: Future, Venge, Tarmac stems
- Fits all Garmin computers including Garmin 1040
- CNC machined 6016-T6 aluminum
- Weight: 41g
- One bolt Specialized SL& stem face plate mounting system
- Includes mounting bolt and TNut
- Lifetime Warranty
- Made in Boise, Idaho USA
- CNC Machined Aluminum
- Combo Compatible (K13-580 adapter sold separately)
- GARMIN approved replaceable computer insert protects computer tabs
- Anodized Black with laser etched logos
- Payload Capacity: Top 123g / Bottom 242g with combo adapter
- Weight- 47g
Compatibility:
- GARMIN Cycling Computers smaller than EDGE 1000, 1030 style (example EDGE 820)
- Combo compatible (GoPro-style light/camera interface) K13-580-BLK adapter sold separately
- CNC Machined Aluminum
- Combo Compatible (K13-580 adapter sold separately)
- GARMIN approved replaceable computer insert protects computer tabs
- Anodized Black with laser etched logos
- Payload Capacity: Top 123g / Bottom 242g with combo adapter
- Weight- 50g
Compatibility:
- All Garmin Cycling Computers
- Combo (GoPro-style light/camera interface) adapter compatible (K13-580-BLK sold separately)
- CNC Machined Aluminum
- Combo (Computer on top – light or camera underneath)
- WAHOO approved replaceable computer insert protects computer tabs
- Anodized Black with laser etched logos
- Payload Capacity: Top - 123g / Bottom 242g on K-EDGE K13-580 Combo adapter
- Weight: 60g
- Mount Type: Clamp 31.8mm
- Mount Weight: 60g
Compatibly:
- All WAHOO Cycling Computers – ROAM, BOLT, ELEMNT, MINI
- Compatible with Wahoo Roam computer
- CNC machined aluminum
- Includes lockable set screw, replaceable insert
- Aerodynamic fit
- 31.8mm clamp
- Mount Weight: 48g
- Creates a dry ceramic coating for increased durability and performance in dry condition
- Excels in dry and dusty conditions
- Biodegradable
- Integral UV tracer dye and UV torch to aid accurate application and ensure total protection
- Replacement freehub body compatible with Neo 2T (T2875.60), Flux S (T2900S.60 A), Flux 2 (T2980.60 A) direct drive trainers
- NOT compatible with older generation Neo (T2800), Neo 2 (T2850/T2850.60), Flux (T2900), Flux S (T2900S/T2900S.60) and Flux 2 (T2980/T2980.60)
- High quality Kraftform Plus screwdrivers.
- Multi-component Kraftform Plus handle
- Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer.
- The tips are microscopically roughened for optimal bite to the screw.
- "Take it easy" tool finder with color coding according to profiles and size stamp
- The hexagonal anti-roll feature
- High quality Kraftform Plus screwdrivers.
- Multi-component Kraftform Plus handle
- Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer.
- Lasertips microscopically roughened for optimal bite to the screw.
- ''Take it easy'' tool finder with color coding according to profiles and size stamp
- The hexagonal anti-roll feature
- High quality Kraftform Plus screwdriver.
- Multi-component Kraftform handle for fast and low-fatigue working.
- Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer.
- Holding function
- Anti-roll feature prevents any bothersome rolling away at the workplace.
- Handle markings for simplified finding and sorting of the tool.
- High quality Kraftform Plus screwdriver.
- Multi-component Kraftform handle for fast and low-fatigue working.
- Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer.
- Holding function
- Anti-roll feature prevents any bothersome rolling away at the workplace.
- Handle markings for simplified finding and sorting of the tool.
- T-handle screwdriver: Shape to allow high torque transmission in difficult tightening and loosening situations.
- The ergonomic shape of the handle fills the palm of the hand well, the fingers lie safely in the soft rounded handle recesses.
- The whole hand makes contact with the handle and friction losses between the hand and the handle are avoided.
- Holding function (HF) to securely hold the TORX screw on the tool.
- Special surface treatment of the blades for high corrosion protection and an optimum fit in the screw head.
- T-handle screwdriver: Shape to allow high torque transmission in difficult tightening and loosening situations.
- The ergonomic shape of the handle fills the palm of the hand well, the fingers lie safely in the soft rounded handle recesses.
- The whole hand makes contact with the handle and friction losses between the hand and the handle are avoided.
- Holding function (HF) to securely hold the TORX screw on the tool.
- Special surface treatment of the blades for high corrosion protection and an optimum fit in the screw head.
- Smart mouth geometry significantly expands the range of uses in confined spaces.
- Automatically find the respective placement point after every turn.
- The slim yet robust ring side is angled by 15° to the tool axis.
- The high-quality surface treatment achieves a high and long-lasting corrosion protection.
- With Take it easy tool finder: color coding by size.
- Mini Ratchet compatible with 1/4'' square nuts
- Hi torque capacity up to 65nm
- Simple Left/Right Switchover
- Fine tooth mechanism with 60 teeth
- Small return angle of 6° for precise work
- Ideal for working in confined spaces
- Bit socket with 1/4 inch drive and holding function.
- "Take it easy" Tool Finder with color coding according to size
- Bit socket with 3/8 inch drive and holding function.
- "Take it easy" Tool Finder with color coding according to size
- Bit socket with 1/4 inch drive and holding function.
- "Take it easy" Tool Finder with color coding according to size
- Bit socket with 3/8 inch drive and holding function.
- "Take it easy" Tool Finder with color coding according to size
- Compatible for Manual and power tool socket insert (ISO 2725-Part 3)
- "Take it easy" Tool Finder with color coding according to size
- Featuring a good grip to allow easy pick-up even with oily hands.
- Ball stop groove, for hex head bolts and nuts; chrome vanadium steel, matt chrome-plated.
- Wera Zyklop extension with easy-to-grip free-turning sleeve
- Made out of high quality chrome vanadium steel, matt chrome-plated.
- 1/4 drive 1/4 outcome
- Bicycle tool set
- 14 pieces
Includes:
- Hex Screwdriver (2, 2.5mm)
- T-Handle Hex-Plus with HF (3, 4, 5, 6, 8mm)
- Torx Screwdriver (TX10)
- Torx T-Handle with HF (TX20, TX25)
- Flat Screwdriver (1.0x5.5x100mm and 1.2x7.0x125mm)
- Phillips Screwdriver with lazertip (PH1, PH2)
- Two Wall Rack
- Short compact Stubby shape for working in tight installation spaces with 7 Included bits
- Ergonomic 2-component Kraftform handle for precise work
- Stainless Steel Bits
- Captive and swiveling bit magazine for easy removal and safe storage of bits
- Take it easy tool finder: color coding according to profile and size
Includes:
- Stubby Kraftform screwdriver
- Phillips (PH1)
- Torx (TX10, TX25)
- Hex-Plus (2.5, 3, 4, 5mm)
- Particularly suitable for narrow wrenching situations on the bike
- Joker 6003 pedal specifique size 15mm with flat mouth to mount and dismount pedals
- Special mouth geometry expands the placement possibilities of the tool
- High-quality surface treatment achieves a high and long-lasting corrosion protection.
- Low return angle in the mouth "takes" the screw every 15°
Includes:
- Joker 6003 size 6, 7, 8, 9 ,10, 11, 12, 13, 16, 17mm
- Joker Pedal wrench 15mm
- Joker pouch suitable for attachment to walls, shelves, workshop trolleys and the Wera 2go system
- Tire levers set made of glass fibre reinforced plastic
- Safely lever the tires off of the rim without damaging the rim
- 1/4" hexagon mounting in the tire lever allow the use of a 1/4" bit
- With valve core tool and deflater
- T-handle screwdriver for the transmission of particularly high torque
- Ergonomic 2-component handle with finger handle recesses and pleasant surface feel for very high power transmission and fatigue-free working.
- Take it easy tool finder: color coding according to profile and size
- With holding function (HF) on the long arm to securely hold the screw on the tool
- New metal rack
Includes:
- 454 T-Handle Hex-plus (2.5mm)
- 454 T-Handle Hex-Plus with HF (3, 4, 5, 6, 8, 10mm)
- 467 T-Handle Torx with HF (TX10, 20, 25)
Page 1 of 104
Next page