Parts & Accessories

• Installs on any 1/4-inch (.635cm) hose for easy disconnect/connect. • Bonus extra male piece and hose to connect to water filters.

Hoses need to be wrangled, lest they become too uppity. Osprey's Hydraulics Three-Magnet Kit will hold things together. This pack comes with 3 detachable sternum strap magnets, and it'll make any pack Hydraulics Reservoir compatible!

XLAB's Sonic Wing Dual Bottle Rear Carrier fits perfectly in seatposts with 2 6mm holes and lets you carry your gear behind you tucked out of the wind. This versatile carrier gives you options galore so you can easily attach what you need for any length ride. You also have 30 different mounting options and can keep it upright for low drag or invert it for easy access. And, since it attaches to the seatpost, the Sonic Wing works with most seats too. Its aluminum construction means there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps. Compatible with Cervelo seatposts with two 6mm holes as well as the new QR PR6.

The Wolf Tooth Bottle Shift is designed to offset a bottle to a more optimal location and make it possible to also mount a pump on frames with large downtubes. It is most commonly used on dual suspension frames where the water bottle is difficult to access because of interference with the top tube or shock. By shifting the bottle slightly off center and tilting it outward, clearance is greatly improved. - Slots and extra tapped holes in the mount provide 18mm of bottle position adjustment - Designed to be easily flipped to provide either left or right hand bottle access - Centerline of the bottle moves 18mm with the combined 10 degree tilt and 9 mm offset - Offset of pump bracket mounting holes allows mounting mini pumps on most mountain bikes

XLAB's Turbo Wing Rear Carrier delivers options galore so you can easily attach bottles, a bag, CO2 cartridges, and everything else you need for any length ride, and keep it all neatly tucked behind you, out of the wind. There are also 15 different mounting options and you can keep it upright for low drag or invert it for easy access. Plus, it's made of light, strong aluminum, which means there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.

This water bottle enclosure is designed to insulate and prevent water from freezing when riding in cold conditions. - Waterproof, 5.5mm neoprene construction with nylon lamination inside and outside - Includes: plastic cage, Allen key, screws and washers - Fits and encloses up to an average 20oz bottle and has enough room for a heat pack - Extended zipper pull for easy open close while riding with winter gloves - Reflective material on logo

Aluminum BTA hydration mount compatible with Torpedo Versa (sold separately). Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts. - Adjustment Width: 75-150mm - Construction (Plate): 6061-T6 Aluminum - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Weight: 1.9oz (55g)

Keep your reservoir funk-free with this cleaning brush kit from CamelBak.

Make quick work of any bottle-cap-removal operation with Park's BO-2 Bottle Opener. This ergonomic tool is made of stainless steel with a comfy vinyl coating.

Profile Design bottle cage storage securely and conveniently uses your bottle cage as a cargo carrier. The screw-top, bottle-shaped containers carry necessities—whatever you need along the way.

An essential accessory for any camper or outdoor enthusiast, the Reservoir Gravity Kit clicks into place with ease to convert the Crux 2L Reservoir Filtration Kit into a gravity bag. The Gravity Kit includes a U-shaped tube that connects the reservoir to the filter in a downward orientation via the easy-to-use Quicklink system. A secondary tube extends from the filter body and has an on/off valve allowing for steady flow water delivery. Hang the fully assembled reservoir and allow gravity to provide reliable and clean drinking water.

Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 27mm-35mm diameter

The Crux delivers 20% more water per sip, with an ergonomic handle for easier refilling, and an on/off lever that makes it easy to prevent leaks. - Offers 20% more water per sip - Leak-proof cap is easier to open and close - On/off lever lets you seal your drinking tube shut with one hand - Hydroguard technology inhibits the growth of bacteria in the reservoir and tube - Big bite valve self-seals after each drink, eliminating annoying drips - Dimensions: 38 x 19 x 6 cm / 15 x 7.5 x 2.5 in

New Crux tube offers 20% more water per sip, and with the insulated thermal sleeve your water stays cooler in warm weather.

Durable, fiber reinforced Composite Matrix construction. Optimized side-load shape for easy bottle access in compact frames (right side configuration only). Integrated storage container below the cage with CO2 cartridge holders on both sides of the cage. Engineered to hold bottles securely. Oval mounting holes allow fine tuning of position on frame. - Weight: 94g

Give your pack a lower center of gravity with the brand new Crux LR reservoir. It delivers 20% more water per sip while keeping weight positioned low on your back, which translates to better stability in the saddle and on the trail. The Crux delivers 20% more water with every sip, plus an on/off lever that seals your tube shut when you’re not drinking. CamelBak also upgraded the fill-port design to include an ergonomic handle and a redesigned a cap that’s more intuitive and easier to fill—small changes that make it that much easier to fill up and hit the road.

Colored talons for the Raptor Cage. Now you can finally match your cage to your bike at a low cost!

The Delta 425 is among the lightest and stiffest, adjustable single rear bottle carriers on the market. Compatible with ISM saddles. The Delta 425 mounts to the saddle rails and hides in the body's draft. Angle and height are highly customizable for that perfect fit. It includes a tight-gripping Gorilla XT carbon fiber cage for a secure hold.

New Torpedo Bottle and essentials to reload your Torpedo System, or upgrade to the new Anti-Leak Design. Includes: Super-Sealed TORPEDO Bottle, Straw, Drink Valve, Solid and Split Lids, Leak-Free Breather Valve, Dolphin Tail Straw Retainer and Hardware.

The Bite Valve Cover keeps your reservoir bite valve free from dirt and dust on the trail.

Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 22mm-29mm diameter

XLAB's Mini Cage Pod is a screw-top holder for your on-the-road tools and spares that fits in your bottle cage. It's convenient to move from bike to bike, it protects your gear, and it includes a fleece bag so the contents in the pod don't rattle and make noise inside. The pod is 500ml capacity to hold a spare tube, levers, CO2 inflator and multi-tool.

Hydration for running, hiking and biking, wherever you may roam. We create ever-evolving hydration systems that keep up with our always-exploring adventurers. The Fusion 2L Reservoir with Tru Zip Waterproof Zipper offers revolutionary design that's easy to use.  We bring heavyweight features in an ultralight package equipped with a universal hanger for all hydration-compatible packs. Molded backplate creates a thin profile with no need for baffles so cleaning is that much easier. Made with safer chemicals, earning the Repurpose Green Sustainability Badge. At journey's end, everyone will enjoy easier cleaning thanks to Hydroguard technology which inhibits the growth of bacteria in the reservoir and tube.

Keep your water flowing freely, even in the most harsh conditions. The Crux Thermal Control kit takes insulation to the next level so your tube and valve stay ice-free. Designed for reservoirs with the Quick Link system, this cold-weather accessory will extend the range of use your hydration pack during all outdoor adventures. Features: - Insulated Tube: Protects the flow of your fluids in cold conditions - Freeze-Proof Valve: Integrated cover keeps ice from forming in bite valve - Fits Reservoirs with Quick Link System: Keep your Crux working hard year-round with this easy upgrade

Our lovely VO bottle cage mount allows you to affix water bottle cages on your handlebars. They are made of extruded aluminum and are intended for city bikes, so they fit bars up to 25.4mm. The mount comes with the two bolts needed to attach the cage to the mount (Some riders will want to use them on the 26mm "sleeved" road bars. In that case you'll need to file just a touch off the top edge of the "hinge" section so it opens a liitle wider. Of course, it's no problem to use them on "bulged" road bars.)

The taste of water from a funky reservoir is high on the list of experiences that one should combat at all costs. This cleaning kit comes complete with a reservoir cleaning brush, delivery system brush, and a drying rack to help ward off uninvited microbial visitors looking to take up residence in your reservoir.

Keep your reservoir free from taste and odor and ready for your next adventure. Fast-acting tablets are easy to use and work in just 5 minutes. - Periodic cleaning with CamelBak Cleaning Tabs keeps reservoir and tube free from taste and odor - CamelBak Cleaning Tabs work in just 5 minutes for a thorough cleaning - 8 Cleaning Tablets Per Pack.

Ride with confidence—keep optimal safety in mind with the all-new Impact Protector panel. Ultra-light and supremely flexible to move with the twists and turns of the trail. - CE1621-2 Level 2 Protection Withstands multiple impacts - Designed specifically to be used with select CamelBak hydration packs - Lightweight materials unparalleled protection without the weight penalty - Extremely flexible design contours to back and moves with you for all-day comfort

XLAB's Mezzo Cage Pod is a screw-top holder for your on-the-road tools and spares that fits in your bottle cage. It's convenient to move from bike to bike, it protects your gear, and it includes a fleece bag so the contents in the pod don't rattle and make noise inside. The pod is 750ml capacity to hold a spare tube, levers, CO2 inflator and multi-tool.

Our new Fusion 6L Group Hydration Reservoir is perfect for adventures with friends and family. Enjoy our campout convenient high flow spigot for filling vessels, washing hands or cooking. It's enhanced by Hypalon-reinforced hanging points let you hang from a tree or other surface for performance no matter where you are. Compatible with CamelBak filtered by LifeStraw reservoir filter kit for clean drinking water on the go. Pair with our ChillBak Pack 30 Cooler for portable party people to keep beverages cool. Dig dynamic design compatibility with our CamelBak reservoir filter kit and easy collapsibility for simple storage when the party's home for the week.  Made with safer chemicals, earning the Repurpose Green Sustainability Badge.