Tires/Tubes

Whisky’s tubeless rim tape is designed to make setup as easy as possible. Elasticity allows for smooth, even adherence while translucency lets you see where the tape contacts the rim. Different widths available to fit almost any rim.

No.9 Tubeless valves for use with Whisky Tubeless rims and most other systems. These alloy stems feature removable Presta cores and are designed to fit up to 8mm valve holes. - Available in a number of lengths and colors to perfectly fit your rims and your sense of style. - Includes two valves

WeThePeople innertubes are made of high-quality rubber and work very well to keep air in your tires. Designed for today's wider tires, they keep you rolling smoothly in all conditions. These are for 22-inch tires.

Click to enlarge The A Dugast Small Bird tire is the perfect all-round choice for mixed conditions. The tread can be used on a course where the top layer of the course is slippery. The duo compound gives the tire its excellent capacities, combined with outer knobs that are twice as high as the studs in the middle. The outer knobs utilize an extremely soft rubber mix to provide extreme grip in the turns. Because of the lower knobs in the middle, the rolling resistance is very limited. - Cotton casing with 240 TPI count offers excellent puncture resistance, elasticity, rolling resistance and handling in corners - Neoprene is a 0.1 mm-thick protection silica coating applied to the casing to extend the lifetime by preventing the tire casing to absorb humidity and mud - Zylon bead for easy fitting and air retention - Bead Shield reinforcing guard for extra bead protection - Tubeless Ready Construction and Hookless compatible - Approved for use with hookless rims

The technical small-block tread layout of the Vittoria Barzo tire has constant effective-edge center and lean-dependent sipe angles. - Center tread consists of an alternating ridge pattern with progressive sipe angles - Shoulder tread utilizes a moto-style block knob in a V-formation - Designed for performance in rough and smooth hardpack - Approved for use with hookless rims

The Corsa has been the race-day choice of pros for years and is now better than ever. The Corsa achieves the holy grail of performance: speed, suppleness, durability, and reliability. Whether winning a Grand Tour, or a local crit, the Corsa family delivers world-class performance. - 320 TPI Kevlar reinforced Corespun-K casing for increased sidewall protection - 4 separate Graphene rubber compounds

Speed and reliability for riders pursuing a new performance level Corsa N.EXT is the exciting new addition to the Corsa family. Designed to satisfy the requirements of enthusiast cyclists who clock up the miles on long and demanding weekly rides, Corsa N.EXT combines Vittoria's peerless knowledge of racing performance with the durability of a long-lasting nylon casing that uses a unique Silica and Graphene compound for improved rolling efficiency, grip and longer wear-life. To increase puncture protection, the central section of the casing features 3 layers of nylon as well as an additional puncture protection belt. Corsa N.EXT is the first road racing tire to feature a QR Code—printed on the tire hot patch—for easy access to useful technical information about the tire. Racing inspired speed and feel, with the everyday durability of nylon construction - New combination of Silica and Graphene compound for improved rolling efficiency, grip and longer wear-life - Nylon casing provides durability, for daily racers who want to raise the bar of their performance relying on a long-lasting tyre - Proven tread design used by Vittoria teams in the World Tour

The Corsa Pro tire is the choice of the pro peloton, now even faster and with increased wet weather grip and puncture resistance. - Graphene + Silica compound ensures speed and confidence through a range of surface conditions, for the ultimate control - Proven cotton casing material, wrapped in a revolutionary new construction process provides the foundation for the new standard in race-day performance road tires - High-density layer below tread surface for improved puncture resistance - Zylon bead for easy fitting and air retention - Bead Shield reinforcing guard for extra bead protection - Tubeless Ready Construction

The Rubino V features an improved tread pattern and construction to help increase speed, grip, and durability while retaining the classic all-around DNA the Rubino is known for. - Modernized tread increases speed, grip, and durability by utilizing a smooth center, which transitions smoothly into updated chevron clusters, while retaining the familiar grid texture at the limit - Graphene + Silica compound is engineered for long mileage, puncture resistance, high grip and speed for everyday use - 100 TPI nylon casing ensures durability, longevity and reliability - Anti-puncture belt and bead shield guarantee extra protection where needed the most - Bead Shield reinforcing guard for extra bead protection against sharp edges

The Speedster’s minimal tread pattern and low-profile honeycomb center tread keep rolling resistance down to a minimum. The diamond-shaped side lugs get increasingly bigger from the center towards the outside to increase cornering grip. Designed for hard pack or paved terrain, the Speedster is effortlessly fast in the dry and sheds water efficiently in the wet

The Speedster is a high performance race and dirt jump tire designed for speed and minimal drag on hard packed or paved terrain in wet or dry conditions. - Honeycomb center tread provides added traction and increased speed with very low rolling resistance; large diamond shaped side knobs give extra grip and cornering control - Large diamond shaped side knobs give extra grip and cornering control - Low Specific Gravity Compound is lightweight and designed for high speed

"At a featherweight of about 23g, the super-compact S-Tubo Road tube stands out from the rest. The low rolling resistance of the Tubo outpaces standard rubber tubes, yet is comparable to latex tubes. With a significantly smaller packed size and the same puncture resistance as standard tubes, the S-Tubo Road is the perfect choice as a spare and can be the crucial factor when you're riding long and hard. - S-Tubo series tubes are intended for spare tube use - Easy to install to get you back on the bike - Designed for disc brake use only

Minimum weight and maximum protection: Tubo-MTB-Plus tubes are optimized for tire widths from 2.5" to 3.0", today’s standard for E-MTBs. Their low weight of 105g (for 27.5+) increases your battery life, and they're also a lightweight alternative to tubeless setups. - 42mm valve length

Super light at only 38g, the Tubo-ROAD-700c makes racing bikes even lighter. It's 70g lighter compared to a standard tube, a decisive success factor both over challenging long distances and when it comes to seconds. Suitable for disc and rim brake wheels.

OS20 diameter BMX race tires designed to balance traction and low rolling resistance with a block-designed center tread. - CYLEX 120 TPI superlight casing - UTC rubber compound - Patterned sidewall adds abrasion protection while maintaining casing suppleness - OS20 utilizes a larger diameter tire design to increase rolling efficiency Compatibility: - Must use with specific OS20 frames and rims, however many forks will accept this tire sizing currently - ISO Diameter = 451mm - NOT compatible with standard 20-inch BMX rims (ISO Diameter = 406mm)

- Labeled Size: 26 x 3.5 – 4 - ISO Width: 88mm – 100mm - ISO Diameter: 559 / 26" MTN - Shaft Type: Threaded - Valve: Standard Schrader - Valve Core: Removable - Wall Thickess: 1 - Tube Compound: Butyl - Weight: 500

- Size: 29 x 2.1 – 2.3 - 4mm wall thickness in the tread area and 2mm in the rim area - ISO Diameter: 622 / road / 29" , 630 / 27" - ISO Width: 54mm, 55mm, 56mm, 57mm, 58mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded - Weight: 681g

- Low Lead Valve - ISO Diameter: 203 / 12.5 - ISO Width (mm): 57mm - Labeled Size: 12 x 2-1/4 - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth

- Size: 14 x 1.5 – 2.25 - ISO Width: 44 – 55mm - ISO Diameter: 254 / 14" - Wall Thickness: 0.9 - Shaft Type: Smooth - Valve: Standard Schrader - Valve Core: Removable - Tube Compound: Butyl

- Low Lead Valve - ISO Diameter: 305 / 16" BMX - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 76g (1.25-1.5), 92g (1.5-1.75), 102g (1.75-2.125)

- Low Lead Valve - ISO Diameter: 355 - ISO Width: 44mm , 45mm , 46mm , 47mm , 48mm , 49mm , 50mm , 51mm , 52mm , 53mm , 54mm - Labeled Size: 18 x 1.75-2.125 - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 118g

- ISO Diameter: 406 / 20" BMX - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Presta - Valve Shaft: Threaded - Valve Core: Removable

- ISO Diameter: 507 / 24" BMX - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded Note: This product may have different packaging than pictured with a slightly different labelled size. Rest assured, the size range on the package will have the same or a broader functional range as the listed sizing of the product you ordered.

- Size: 26 x 1.0 – 1.25 - ISO Diameter: 559 / 26" mtn - ISO Width: 25mm, 26mm, 27mm, 28mm, 29mm, 30mm, 31mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 96g

- ISO Diameter: 559 / 26" mtn - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 102g (1-1.25), 165g (1.5-1.75), 174g (1.9-2.125), 198g (2.1-2.3), 281g (2.4-2.75)

- Size: 650c x 18 – 23 - ISO Diameter: 571 / 650c - ISO Width: 18mm, 19mm, 20mm, 21mm, 22mm, 23mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 89-92g

- Size: 700c x 28 – 32 - ISO Diameter: 622 / road / 29" - ISO Width: 28mm, 29mm, 30mm, 31mm, 32mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 128g (32mm), 129g (48 & 60mm)

The Tacx trainer tires have been developed specifically for riding indoors on bike trainers. The special rubber minimizes the risk of overheating, slipping, and wear and tear. They are also quieter than regular rear tires on both road and mountain bikes. Tacx trainer tires are not suitable for outside riding.

- Valve: Presta - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm