Filter By:

  • Show More Brands

  • Show Fewer Brands

Forks

Specialized Ohlins RXF 36 Coil 27.5+/29-inch Fork
$1,150.00
The Ohlins RXF 36 Coil fork uses the same chassis of the RXF 36 fork, keeping the same stiffness, room for bigger tires, and proprietary TTX damping technology, but instead uses high quality coil springs that are easily swapped for various rider weights and it utilizes. This provides a ride with great feel throughout the travel—from small bumps to big hits. - Features a coil spring, with multiple spring rates in 0.9N/mm / 5lb/inch increments, allowing for a plush, linear suspension feel, tuned specific for the riders weight. - TTX (Twin Tube) damping enables separated oil flow, so the fork will always provide the perfect degree of pressure. This way, it stays smooth and high in the travel without compromising bump absorption, traction, or stability. - A tapered alloy steerer and two piece crown ensure high stiffness and tire control with less chassis flex and chassis hysteresis. 36mm stanchions with 51mm offset for party time on the trail. - 150 and 160mm travel options available. - 110 x 15mm spacing makes it compatible with most 29-inch setups.
Specialized Ohlins RXF 36 27.5-inch Fork
$1,100.00
The Öhlins RXF 36 fork drafts off of the success of the 34, while bringing more stiffness and room for bigger tires. It operates off of a three-chamber air spring design (two positive and one negative), and it utilizes proprietary TTX damping technology. Combined, this allows both parallel and separated oil flow that controls the overall pressure levels. In a practical sense, this means that the fork is guaranteed to remain high in the travel, while also ensuring smoothness and predictable bump absorption throughout the entire ride. The shape of the spring force is also capable of being adjusted, which allows riders more fine-tuning options for preferences like increased sensitivity without the threat of bottoming out. Öhlins has increased the stanchions to 36mm and upped the spacing to 110mm with an ultra-stiff two-piece alloy crown design. This means that it'll experience less flex for more tire control, while also trimming down on some weight. - Features a three-chamber air spring, with two positive chambers and one negative, allowing for an offset of spring pressure that perfectly mates stiffness with a plush, responsive ride quality. The shape of the spring curve can also be adjusted to increase sensitivity without bottoming out. - TTX (Twin Tube) damping enables separated oil flow, so the fork will always provide the perfect degree of pressure. This way, it stays smooth and high in the travel without compromising bump absorption, traction, or stability. - A tapered alloy steerer and high alloy two-piece crown ensure high stiffness and tire control with less chassis flex and chassis hysteresis. 36mm stanchions with 46mm offset for party time on the trail. - 150 and 170mm travel options available. - 15x110mm spacing.
RockShox Pike DJ
$849.00
This is Pike DJ. It’s a cousin to the award-winning Pike, which makes it look a lot like a trail fork. And you can call it a trail fork if you want — especially if your trails are named "Flip-whip," "Truckdriver" or "Cash Roll." Pike DJ is built on a stout 35mm chassis, and includes a custom tuned Charger damper and specific Solo Air system designed for like a metric ton of bottom-out progression, because your trails eventually require some landings. - Award-winning Pike Chassis - Custom-tuned Charger damper - Charger Damper with specific Dirt Jumping/Slopestyle tune (extra-firm compression) - Specific Solo Air top cap for extra bottom out progression (tunable with Bottomless Tokens) - Updated graphic package to complement the RockShox lineup
ENVE Mountain Fork
$625.00
There is beauty in simplicity and it's hard to argue with the simplicity of an unsuspended mountain bike. Despite its uncomplicated nature, ENVE's rigid Mountain Fork is loaded with unique features such as a removable fender, disc brake hose clip, and reversible axle inserts to fine tune the rake of the fork to match your ride preference and application. - Material: Carbon Fiber - Steerer Tube Length: 300mm - Rake: 44, 52 Adjustable - Axle to Crown: 470mm - Brake: Disc - Max Rotor Size: 180mm - Max Tire Clearance: 3.4-inch - Crown Race Diameter: 1.5-inch - Torque Spec: Steer Tube: 5.5 Nm - Torque Spec: Axle: 8Nm - Weight: 711g (w/ fender), 686g (w/ clasps)
Salsa Firestarter Carbon Fork
$599.00
The Firestarter Carbon Fork is Salsa's high-end, rigid bikepacking fork. This sure-tracking platform features a carbon structure and 15mm thru-axle design, and the Three-Pack mounts on the forward portion of each leg allow use of Salsa Anything Cages or extra water bottle cages. - Axle to Crown Length: 483 mm - Brake Mount (Fork): Post Mount 160 - Crown Race: 40 - Front Axle: 15mm Thru x 100mm - Wheel Mount Center Offset (mm): 0 - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Tapered - Steerer Tube Length (mm): 260 mm - Weight: 620 g - Wheel Size: 29er, 29+, 700c - Rotor Size (Fork): 200 - Maximum Tire Clearance (Fork): 3
DVO Jade Coil Shock
$585.00
- Compression loader damper unit with bladder for amazing small bump compliance and no stiction off the top - Externally adjustable rebound and high/low speed compression - Shock body cooling fins keep things running cool - Spring and mounting hardware not included, must be purchased separately - Adjustments: high speed compression, low speed compression, rebound, spring preload - 425 grams
Whisky Parts Co. No. 9 CX Fork Straight Steerer
$520.00
The No.9 CX Flat Mount fork is a light-weight, forward-compatible front-end upgrade, ideal for cyclocross, gravel, or commuting. Featuring the flat mount disc brake standard, easy fender mounts and 12mm thru-axle dropouts to create a refined, clean design that trims considerable weight over previous versions. The fork provides big tire clearance, precise handling and tracking capabilities, and a comfortable ride quality that Whisky forks are known for. - 12mm thru-axle, 100mm spacing - Designed for flat mount disc brakes - Hidden, removable fender mounts - 42mm max recommended tire size - ASTM Condition 2 - For off-road riding and jumps less than 12-inches - Includes thru-axle and Whisky Parts Co. compression plug
Whisky Parts Co. No.9 CX Flat Mount
$520.00
Whisky's No.9 CX Flat Mount is the updated version of the original No.9 CX fork. Building on the precise tracking and braking performance of their original, they've pushed performance even further with this fork. Lighter weight, updated fitment and clean lines make for a supremely capable fork. - 12mm Thru Axle - Flat Mount Disc Brake - Tapered Steerer Tube - 700x42c/650x47c clearance - Hidden, Removable Fender Mounts
Whisky Parts Co. No.9 Carbon Disc Cyclocross Fork w/Fender Mounts
$520.00
When a fork isn’t designed well, you feel it from the minute you start your ride. That is why Whisky poured over every detail, pushed the limits, and broke new ground during the creation of the No.9 Carbon Disc Cyclocross Fork. It eliminates uncomfortable chatter and vibration for an astoundingly plush ride. The delightfully stiff and compliant UD carbon fiber construction, disc brake mounts, and a stiff, secure thru-axle ensure low weight and precise braking and handling. Plus, fender mount means you'll be bounding out the door on even the rainiest days. It all results in an enhanced riding experience and adds up to performance that you can count on. - Axle to Crown Length: 395mm - Brake Mount: Post Mount 140mm - Crown Race: 40 - Front Axle: 15 x 100mm - Material: Carbon - Maximum Tire Clearance: 45mm - Offset: 45mm - Rotor Size: 185mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Tube Length: 300mm - Steerer Type: Tapered - Wheel Size: 700c
Whisky Parts Co. No.9 Carbon Mountain Fork 29-inch
$520.00
Whisky poured over every detail, pushed the limits and broke new ground during the creation of the No.9 Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough sections for an astoundingly plush ride. The delightfully stiff and compliant UD carbon fiber construction, tapered steerer, and 15mm thru-axle ensure minimal weight and precise handling. It all results in an enhanced riding experience and adds up to performance that you can count on. - Custom DT RWS Skewer included - 3.0" max recommended tire size - Axle to Crown Length: 480mm - Brake Mount: IS Disc Brake 160mm - Crown Race: 40 - Defined Color: Black - Front Axle: 15 x 100mm - Offset: 51mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Tapered - Weight: 750 grams - Wheel Size: 29-inch
Whisky Parts Co. No.9 Fat Fork Carbon Mountain
$520.00
Whisky poured over every detail, pushed the limits, and broke new ground during the creation of the No.9 Fat Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough terrain, so you experience an astoundingly plush ride with precise handling. They've accomplished this by using a delightfully stiff and compliant UD carbon fiber construction, a tapered steerer, and a 15 x 150mm thru-axle. It all results in an enhanced riding experience and adds up to performance that you can count on. - Post style brake mount - DT RWS Axle included - UD full carbon construction - Axle to Crown Length: 480mm - Brake Mount: Post Mount 160mm - Crown Race: 40 - Front Axle: 15 x 150mm - Material: Carbon - Offset: 51mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: 1-1/8 – 1-1/2-inch tapered - Weight: 750 grams - Wheel Size: 26-inch
Whisky Parts Co. No.9 RD+ Flat Mount
$520.00
Whisky's No.9 RD+ is an all-road fork designed for versatility with abundant tire clearance, up to 700x38c or 650x47c. Hidden and removable fender mounts make this fork all season capable. - 12mm Thru Axle - Flat Mount Disc Brake - Tapered Steerer Tube - 700x38c/650x47c clearance
Whisky Parts Co. No.9 Road Flat Mount Disc Fork
$520.00
The Whisky No.9 RD thru-axle fork is designed from the ground up to offer a modern road fork experience. Big tire clearance, flat mount brake capability, and internal cable routing all add up to a clean look and capable performance. Featuring sleek hidden fender mounts, this fork carries through with Whisky’s promise of refined, versatile performance. - 1-1/4-inch Tapered steerer tube - 12mm thru-axle, 100mm spacing - Designed for flat mount disc brakes - Hidden, removable fender mounts - 700 x 30c max recommended tire size - Includes thru axle and Whisky Parts Co. compression plug
Salsa Makwa Carbon Fork
$499.99
The Makwa fork is Salsa's fat bike race fork. Lightweight and stripped of extras, its thru-axle design boosts stiffness and aids in solid tracking on the trail. This fork is spec’d on Salsa's 2014 Beargrease bikes, and is also fully compatible with their 2014 Mukluk frames. - Axle-to-Crown Length: 483mm - Brake Type: Disc - Brake Usage F/R: Front - Color: Black - S.H.I.S. Crown Race Diameter: 40 - Fork Rake: 51mm - Front Axle Type: 15mm thru - Front Axle Size: 15 x 171L, TP=1.5, TL=10 - Front Hub Spacing: 142mm - Material: Carbon - S.H.I.S. Clamp Diameter: 28.6 - Steerer Tube Length: 260mm - Steerer Type: Tapered - Weight: 720g - Compatible with all 26 x 4.0–5.0" tires and 29+ tires
Salsa Cutthroat Fork
$499.00
The Cutthroat carbon fork is full of features, ready for any adventure. - Full Carbon fork, tapered steerer - Fits 29 x 3.0" tires - Three-Pack mounts - Crown light mount - Axle to Crown Length: 483 mm - Brake Mount (Fork): Post Mount 160 - Crown Race: 40 - Front Axle: 15mm Thru x 100mm - Wheel Mount Center Offset (mm): 0 - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Tapered - Steerer Tube Length (mm): 260 mm - Wheel Size: 27.5+ , 29" , 29+ - Rotor Size (Fork): 200 - Maximum Tire Clearance (Fork): 3
RockShox 30 Gold RL with OneLoc Remote
$419.00 - $439.00
Light (actually, very light)? Check. Easy to set up? Check. RockShox ride quality? Check. Too good to be true? Not if you are referring to the RockShox 30 Gold, featuring Motion Control damping. - Motion Control damping featuring low speed compression adjustment to lockout - Fast Black aluminum upper tubes - Solo Air spring - Includes remote
ENVE Road Fork Rim Brake
$387.00 - $427.00
ENVE's Road Fork is the fork by which all others are judged, built for road cyclists looking for the optimal balance of weight, strength, and stiffness. When everyone was turning away from the fork aftermarket, we focused our efforts on creating the best aftermarket fork we could. By following our mantra of functional simplicity, we developed a manufacturing process that allows the fibers in an ENVE fork to run continuously from the top of the steerer to the bottom of the drop-outs. The ENVE forks feature a hollow one-piece design free of bonding or drilling, and the brake bolt hole is molded into the crown, allowing for additional weight savings and strength. You can literally put an ENVE fork on a bike within minutes of it leaving the mold. While this manner of construction is novel, the real win is that the majority of artisan frame builders and customers choose ENVE as their fork of choice due to its confident on-road performance and handling characteristics.
Whisky Parts Co. No. 7 Road Plus Fork
$420.00
The No.7 road fork features full unidirectional carbon construction, available in tapered or straight steerer tubes. - Full unidirectional carbon construction - Mid-Reach Caliper rim brake compatible - 35c max recommended tire size - ASTM Condition 2 - For off-road riding and jumps less than 12" - No rider weight limit - 5 year Whisky warranty - Accommodates road plus tires - Fender mounts
Whisky Parts Co. No.7 Carbon Cantilever Cyclocross Fork
$420.00
When a fork isn’t designed well, you feel it from the minute you start your ride. That is why Whisky poured over every detail, pushed the limits and broke new ground during the creation of the No.7 Carbon Cantilever Cyclocross Fork. It makes sure you don't have to worry about uncomfortable chatter or vibration while experiencing an astoundingly plush ride. They've accomplished this by using the proven technology of a delightfully stiff and compliant UD carbon fiber construction. It all results in an enhanced riding experience and adds up to performance that you can count on. - Cantilever brakes with 22mm posts - 51mm clearance between fork blades - Includes compression plug - Axle to Crown Length: 392.2 mm - Brake Mount (Fork): Canti Studs - Crown Race: 30 - Front Axle: 10mm x 100mm - Material: Carbon - Maximum Tire Clearance (Fork): 48mm - Offset: 45 mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Tube Length (mm): 300 mm - Steerer Type: Straight - Wheel Size: 700c
Whisky Parts Co. No.7 Carbon Disc Cyclocross Fork
$420.00
When a fork isn’t designed well, you feel it from the minute you start your ride. That is why Whisky poured over every detail, pushed the limits, and broke new ground during the creation of the No.7 Carbon Disc Cyclocross Fork. It makes sure you don't have to worry about uncomfortable chatter or vibration while experiencing an astoundingly plush ride. They've accomplished this by using proven technologies like a delightfully stiff and compliant UD carbon fiber construction, not to mention the use of disc brake mounts on their CX forks. It all results in an enhanced riding experience and adds up to performance that you can count on. - Axle to Crown Length: 392.2mm - Brake Mount (Fork): Post Mount 140mm - Front Axle: 10mm x 100mm - Material: Carbon - Maximum Tire Clearance (Fork): 48 - Offset: 47mm - Rotor Size (Fork): 160mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Tube Length (mm): 300mm - Wheel Size: 700c
Specialized Chisel Carbon Fatboy Rigid Fork
$400.00
Lighten the mood with Specialized's Chisel Carbon Fatboy Rigid Fork. The uni-directional full carbon monocoque structure with carbon legs, crown, and steerer is featherweight. It's got a 160mm post mount for brakes, an integrated aluminum crown race, and aluminum dropouts that are compatible with 135mm hub and SBC OS28 end-caps for increased stiffness.
Ritchey WCS Carbon Road Fork
$399.95
The one-piece carbon monocoque WCS Carbon Road Fork has been meticulously engineered and painstakingly built to perform with razor-sharp accuracy, and offer a comfortable yet lively riding experience. Built with High Modulus Fiber (HMF), this impeccable road fork offers superior strength and a superb road feel. Smooth internal fiber flow in the crown/steerer area delivers the best force transfer from crown to shaft and increased impact strength. The orientation of the fibers have been optimized to absorb and dissipate loads, which delivers a confident and comfortable ride. The fork also uses various fiber types to manage the different load types—such as side load, torsion, and impact— encountered at different parts of the fork. The WCS Carbon Road Fork includes a compression plug and fits up to 28c tires, depending on tire make and model. - 45mm crown is sized for integrated headsets, also looks good with conventional headsets - Designed so that the entire fork dissipates loads, reducing stress on the crown - Carbon monocoque construction with aluminum dropouts - Blade: Carbon - Crown: Carbon - Steerer: Carbon - Steerer Length: 300mm - Steerer Diameter: 1 1/8-inch - Rake: 43/46mm - Crown Diameter: 45mm - Axle-to-Crown: 368mm - Finish: UD Matte - Weight: 325g w/ uncut steerer
Whisky Parts Co. No.7 Road (12mm Thru-Axle)
$399.00
The Whisky No.7 RD thru-axle fork is a thoroughly modern road fork for road bikes with tapered steerer tubes. It features a 12mm thru-axle for precise handling, clearance for high-volume road tires, and clean internal cable routing. Flat mount brake capability offers clean caliper fitment and backwards compatality with post mount brakes using adaptors.
Whisky Parts Co. No.7 Road Fork
$370.00
The No.7 Road fork is a thoroughly modern design, compatible with road bikes that utilize tapered steerer tubes. Features include 9mm x 100mm QR dropouts and brake mount for short-reach caliper rim brakes, to easily accommodate standard road wheels. The fork offers low weight, precise handling and tire clearance for up to 700 x 28c tires. - 9mm x 100mm spacing - For use with short reach caliper rim brakes - 700 x 28c max recommended tire size - ASTM Condition 1 - For use on paved surfaces - Includes Whisky Parts Co. compression plug - Axle to Crown Length: 367 mm - Brake Mount (Fork): Short Reach Caliper (39mm - 49mm) - Color: Black - Crown Race: 30 - Defined Color: Black - Front Axle: 9mm x 100mm - Material: Carbon - Offset: 43 mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Straight - Steerer Tube Length (mm): 300 mm - Weight: 370 g - Wheel Size: 700c , 650b - Maximum Tire Clearance (Fork): 30c
RockShox 30 Gold RL
$349.00 - $369.00
Light (actually, very light)? Check. Easy to set up? Check. RockShox ride quality? Check. Too good to be true? Not if you are referring to the RockShox 30 Gold, featuring Motion Control damping. - Motion Control damping featuring low speed compression adjustment to lockout - Fast Black aluminum upper tubes - Solo Air spring
Whisky Parts Co. No.7 Road (Quick Release)
$325.00
The Whisky No.7 RD fork is a modern caliper road fork for road bikes with tapered steertubes. Their No.7 RD fork features a standard 9mm x 100mm QR axle. It offers low weight, precise handling, and clearance for 28c tires. This is a perfect upgrade fork for in lieu of a steel or alloy fork, and makes a great replacement fork for existing carbon product.
RockShox Recon Silver TK 26-inch
$249.00
The RockShox Recon Silver: a fork with the performance that'll help you beat your riding buddies without beating up your checking account. Sturdy 32-millimeter stanchions, stiff, forged aluminum crown, and dependable Solo Air spring make Recon Silver the fork you've been looking for. Solo Air lets you add air to your forks through a single Schrader valve, filling both the positive and negative air spring chambers simultaneously, and the Turn Key oil damping system offers external rebound adjustment and compression lockout for on-the-trail adjustability. - PopLoc compatible - 2.4" (62mm) maximum tire width - Crown Race: 30mm - Offset: 40mm - Steerer Tube Length: 265mm - Positive Spring: Air - Negative Spring: Air - Travel: 100mm - Wheel Size: 26" - Stanchion Diameter: 32mm
Salsa Cro Moto Grande 29er Fork
$209.00
Salsa Cro Moto Grande Fork 29". - Disc only 29" rigid fork - Suspension corrected for 80mm travel fork - Maxle Included - Axle to Crown Length: 483 mm - Brake Mount (Fork): IS Disc Brake 160 - Crown Race: 40 - Front Axle: 15mm Thru x 100mm - Material: Chromoly Steel - Offset: 45 mm - Wheel Mount Center Offset (mm): 0 - Steerer Tube Length (mm): 260 mm - Weight: 1080 g
Surly Ice Cream Truck 150 Fork
$175.00 - $180.00
The Ice Cream Truck fork is made from 4130 CroMoly steel and is designed for Surly's Ice Cream Truck frame. It's ready for trail use and features butted and tapered blades with thru-axle dropouts spaced at 150mm. It has barrel bosses at the dropouts and crown, mid-blade thru-blade eyelets and triple bottle bosses on both fork legs. That's a lot of bosses. 51mm I.S. mounts use front disc spacing. - Axle-to-crown: 483mm - Offset: 47mm - Steerer: 260mm, 1-1/8-inch straight - Tire Clearance: 26 x 5.25-inch
Surly Midnight Special 650b Fork
$175.00 - $180.00
This beauty here was designed alongside Surly's Midnight Special frame. In an effort to shed a few grams (it's for a road bike after all), they opted to utilize a unicrown design rather than a lugged one. In addition to the weight savings, it also looks really nice — don't you think? Like the Midnight Special frame, this fork is equipped with modern road standards like flat mount disc brakes and a 12 x 100mm thru-axle. For increased versatility, it has braze-ons for fenders and racks (including mid-blade!). - 100% CroMoly construction, fully brazed crown - Mid-blade thru-blade eyelets - Rack and fender eyelets at the dropout - 12 x 100mm thru-axle - Clearance for 27.5 x 2.32 or 700c x 42mm tires
Page 1 of 2 Next page